Driving Theory Test
🇺🇸 English

🛡️ Safety – theory test questions and answers – Page 6

400 official Israeli theory questions on Safety, with the correct answers. Read them all or practise them for free online.

Completely free. No sign-up, no payment.

  1. For what reason are weights installed on the tractor’s front?✓ To improve the front wheels’ surface grip.
  2. For what reason are weights installed on the tractor’s front?✓ To prevent its front part from elevating while lifting loads from its rear side.
  3. What is the function of the tractor’s differential lock?✓ To assist when one of the tractor’s wheels sinks or skids.
  4. Is it possible to brake only one wheel in a tractor?✓ Only on the rear axle.
  5. When is it required to brake only one wheel in a tractor (brake separation)?✓ When the tractor driver wants to make a sharp turn on the spot while driving at a very slow speed.
  6. Is it permitted to drive a tractor with brakes that are permanently separated?✓ No. It might cause the tractor to roll-over while braking.
  7. What is the function of the tractor’s PTO (“Power Take Off”) power transfer?✓ To move attachments and additional equipment operated by the tractor.
  8. What RPM (Rounds per Minute) level should be determined to operate the tractor’s PTO (“Power Take Off”) power transfer?✓ Standard RPM, unless otherwise indicated on the operated equipment.
  9. What is the most important safety rule while operating a PTO power transfer?✓ Stay away from the moving parts of the tractor and of the attachment.
  10. What is the meaning of the PTO power transfer “standard operating speed’?✓ It is the RPM of the power transfer exit and of its drive shaft.
  11. When should the tractor’s differential be locked?✓ When one wheel skids on the ground and the tractor cannot proceed.
  12. What is forbidden to do after the differential is locked?✓ To turn the steering wheel and the wheels from side to side.
  13. Which tractor-derived pressure is used to operate attachments and additional equipment?✓ Hydraulic oil pressure.
  14. What should be ensured before disengaging the hydraulic oil pipe connectors from the tractor’s attachment or from the tractor’s additional equipment?✓ That there is no oil pressure in them.
  15. How would you release the hydraulic oil pressure before disconnecting the supply piping from the tractor’s attachment or additional equipment?✓ Move the operation lever in all directions when the engine is off.
  16. When is it obligatory to install a spark protector on a tractor?✓ When the tractor has a lower exhaust pipe.
  17. Where is the permitted to untie tools or a trailer from the tractor?✓ On a leveled surface, to prevent accidental movements.
  18. What is the function of the tractor’s middle lift arm (“the third point”)?✓ To prevent sideways freedom of movement of the arms and to prevent the tractor turning.
  19. Which action should be taken after the tool is harnessed to the hydraulic lift arms?✓ Preventing horizontal freedom of movement of the arms and of the tool.
  20. How would a tractor and its trailer maintain low speed during a long and steep descent?✓ By driving in low gear and relying on the engine’s compression braking .
  21. It is prohibited to drive too close to the vehicle in front of you:✓ Because it might brake suddenly.
  22. What is a bus driver required to check before moving the bus?✓ Whether there are road users in his blind spots.
  23. What risks are expected when the bus driver makes a sudden brake?✓ Injuring the bus passengers.
  24. The ability to control the vehicle in order to prevent accidents:✓ Is higher the slower you drive.
  25. What should a driver do when he approaches a road section on which oil was spilled?✓ Slow down as moderately as possible, and avoid heavy l braking.
  26. What should a driver do when the road has bumps and cracks?✓ Slow down and adjust his drving speed to the road’s conditions.
  27. Under which conditions is it advised to turn on the lights during the day?✓ When the sun is behind the driver.
  28. Non adjusted headlights:✓ Do not iluminate the road as required by law.
  29. On which part of the semi trailer is a 6.10 meter long freight container loaded?✓ On the rear part – and only when appropriate twist locks are used.
  30. When you apply the brake pedal during an emergency braking:✓ The vehicle continues to a certain distance until reaching a complete stop.
  31. Which vehicles must be equipped with a fire extinguisher?✓ All motor vehicles, except for private passenger cars, tractors and motorcycles.
  32. Can unprescribed medications have a negative effect on driving?✓ Yes.
  33. Is it obligatory to use an appropriate lower gear on every steep descent?✓ Yes.
  34. What is a driver required to do after crossing a flooded road section?✓ Drive slowly and press gently and intermittently on the brake pedal, to ensure that the brakes function properly.
  35. You are driving a heavy truck down a steep and long descent. When should you shift to an appropriate low gear?✓ You should shift to low gear at the beginning of the descent.
  36. What is the risk in shifting gears while driving a heavy vehicle down a steep descent?✓ There is a risk that the gear would not shift and the vehicle would stay in neutral gear.
  37. After connecting a trailer to a towing vehicle or to a truck, is it required to check brake response?✓ Yes, the connection of a trailer or a semi-trailer requires the performance of a brake response check when starting to drive.
  38. When you are driving a truck down a steep descent:✓ Drive in an appropriate low gear and make sure that the vehicle’s special deceleration mechanisms are operating.
  39. What factors affect the stability of a freight-carrying commercial vehicle while driving in a curve?✓ The vehicle’s speed, the radius of the curve and the height of the vehicle’s center of gravity.
  40. The higher is the vehicle’s center of gravity:✓ The lesser is the vehicle’s stability in turns and curves.
  41. How would you connect the truck cabin to the semi-trailer?✓ By driving backwards when both of them are aligned in a straight line.
  42. What risk is a rigid vehicle with trailer or a semi-trailer truck expected to face while driving on a slippery roadway?✓ The vehicle can skid into a “jack-knife” position, in which a large angle is formed between the trailer and the towing vehicle,
  43. What might be the effect of sand scattered on the road?✓ Vehicle skidding, due to reduced friction between the tires and the road.
  44. When is a vehicle affected by centrifugal force?✓ While driving around curves and turns.
  45. How is it possible to reduce the centrifugal force applied to the vehicle whilst driving?✓ By reducing speed.on corners and curves
  46. Why is it required to drive in low gear on a steep descent?✓ To use the engines compression in order to maintain a slow and constant driving speed without overusing the brakes.
  47. The reaction distance depends on:✓ The driver’s reaction time and the vehicle’s speed.
  48. The reaction distance is the distance covered by the vehicle:✓ From the moment the driver notices the danger until he starts to apply the action he decided to take.
  49. What is the correct sentence?✓ The stopping distance is always longer than the braking distance.
  50. You are driving on a two-way road and in front of you drives a vehicle that signals with its left indicator:✓ You should take into consideration that the vehicle before you might deviate to the left and you should allow it to do so.